Just make sure to adhere to our Neighborhood pointers. Remember to have a moment to get accustomed to them before you start.
The mains really should not be laid below properties, significant open storages, railway strains and streets carrying extremely major targeted traffic as much as feasible.
The drinking water reservoirs to feed the hearth hydrant method really should be furnished underground, at ground degree or at higher stage. The capability and the small print of this sort of reservoirs are provided in IS 9668: 1991.
The bottom hydrant system need to Typically not be prolonged to feed riser main in storeyed structures. Only in Exclusive circumstances constructing not exceeding fifteen m. in top, an extension could be utilized, presented ample output and pressure-might be ensured within the system.
即使您使用的桌上型電腦或筆記型電腦未連接至燈效設定檔中所有列出的裝置，您仍可將燈效設定檔局部套用至已連接的裝置。
The static fireplace preventing pumps shall conform to the requirements given in IS 12469: 1988. The capability of pumps should be worked out based on demands of output and pressure to the system.
Isolating (Reduce off) valves needs to be carefully overhauled annually to remove sludge along with other international subject gathered in valve seating.
Regular manhole addresses of Forged iron or bolstered concrete really should not be used to protect underground hydrants or maybe the valves from the stand put up style hydrants. They need to be protected only by hinge cast iron addresses as laid out in IS 3950: 1979 with letters ‘FH’ embossed on them.
Testing of tension and ome88 output in several regions coated by the hydrant process must be carried, at the very least just about every quarter. Hydrant mains must be tested with the pump providing at its highest ome88 pressure with many of the hydrants outlet closed and thereafter, with a minimum of a few adjacent hydrants opened to find out that the ome88 hydrant yield the least output of 1 one hundred twenty five litres per moment at a ome88 least stress of five.
此篇知識可能不適用於所有同類型/系列的產品，部分畫面選項或操作步驟可能會因為軟體版本的不同而有差異。
The dimensions of primary should really depend upon the output and pressure prerequisites and the whole number of hydrants being installed on only one process. Even so, the minimum dimensions of mains ought to be not a lot less than. one hundred fifty mm.
The valve of the hydrant shouldn't be operated when the pit is filled with h2o Unless of course the stand pipe or hose are initially fitted.
To avoid danger of contaminating the water provide, each and every endeavour needs to be manufactured in order to avoid gathering h2o concurrently in the pump from the consuming drinking water principal.
Code of apply for set up and upkeep of ome88 internal hydrants and hose-reel on premises (very first revision)
華碩提供您此非華碩所製造之產品的相關資訊僅為參考之用，請直接洽詢該廠商以瞭解產品詳情，華碩與此資訊或服務無涉。